# Hubsoft integration with CDATA > CDATA (C-Data) manufactures EPON and GPON OLTs and ONUs. With Hubsoft, ISPs can authorize, provision, and unauthorize ONUs on the FD110X, FD120X. Fonte: https://hubsoft.io/en/integrations/cdata/ ![Logo CDATA](/_astro/parceiro-cdata-recortado-mv13cwj6_Z2wsN3E.webp) [OLT](/en/integrations/category/olt/) # Hubsoft integration with CDATA Hubsoft, an ERP for internet service providers (ISPs), integrates with CDATA to authorize, provision, and unauthorize ONUs on the brand's OLTs. Technicians can release a subscriber's ONU from the Hubsoft screen without needing OLT credentials. CDATA (C-Data) manufactures EPON and GPON OLTs and ONUs. With Hubsoft, ISPs can authorize, provision, and unauthorize ONUs on the FD110X, FD120X, and FD12xx/FD1608S lines without opening the OLT terminal. [ Request a Demo ](/en/request-a-demo/) [Partner website](https://www.cdata.com/) ## About CDATA C-Data (Shenzhen C-Data Technology) is a Chinese telecommunications equipment manufacturer founded in 2009\. It produces EPON, GPON, and combo PON OLTs, including models for outdoor installation, as well as ONUs with and without Wi-Fi, routers, and switches. It also serves fiber campus networks (POL) and optical transport networks. ## What the integration does The integration connects Hubsoft to the CDATA OLT via Telnet. Once the OLT is registered, the team can use Hubsoft to: * View connected ONUs and those pending authorization on each PON port. * Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs right afterward, with no additional action. * Unauthorize and deprovision using the commands from the same profile. * Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number. * Wi-Fi network name and password, including the 5 GHz network, entered during authorization when the CPE profile contains Wi-Fi commands. * Run custom commands after provisioning, such as adjusting Wi-Fi settings or activating VoIP. * Receive an alert when the ONU signal exceeds the limit on ports with monitoring enabled. * Log sent commands to check the OLT response when something fails. **Integrated models:** * FD110X Series (EPON) (Telnet, port 23) * FD120X Series (GPON) (Telnet, port 23) * FD1204SN (Telnet, port 23) * FD1208S (Telnet, port 23) * FD1216S (Telnet, port 23) * FD1608S-B0 (Telnet, port 23) * SGT8000A (1U, 2 PON, EPON) (Telnet, port 23) ## What you need * A CDATA OLT in one of the models above, with an access IP address. * The username, password, and access port for Hubsoft to connect to the OLT. * The OLT's POP registered under Network > Points of Presence. * CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Settings > Network > CPE Profiles. The Hubsoft team provides reference profiles for CDATA (bridge). ## How to activate 1. Under Network > Connection Equipment, click Add and enter the name, IP address, CDATA as the manufacturer, the model, and the POP. 2. Enter the username, password, and access port: Telnet, port 23, for all models. 3. Under Actions > View, enable editing and register the PON ports on the Interfaces tab, individually or in bulk, with chassis, slot, PON, starting VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers. 4. To test, open Actions > View Connected Customers and check the Layer 2 and Layer 2 Pending tabs. 5. Authorize the first ONU from the menu next to it by entering the customer, service, and CPE profile. The step-by-step guide with screenshots is available in the Hubsoft wiki: [OLT and port registration](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/cadastrar-olt-portas), [ONU authorization and provisioning](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/autorizacao-provisionamento-onu) and [integrated OLT list](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/olt%5Fintegradas). ## Limitations * Bulk authorization and provisioning work with one PON at a time. If the PON has ONUs in bridge and router mode, process one type at a time. * When registering ports in bulk, register no more than 4 slots at a time. * When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the customer's link to the ONU. ## Frequently asked questions ### My CDATA model isn't on the list. What now? Contact the Hubsoft Infra Support team. They will assess the feasibility of integrating the model. ### Does the technician need the OLT password? No. The username and password are stored in the equipment record. Operators can view and authorize ONUs from the Hubsoft screen without the OLT credentials. ### Can I authorize multiple ONUs at once? Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to customer services, with the serial number entered on the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN. Reviewed on 10/10/2026. ## Similar integrations * ![Logo BDCOM](/_astro/parceiro-bdcom-recortado-mv13crbv_Z7coXR.webp) ### [BDCOM](/en/integrations/bdcom/) OLT * ![Logo CISCO](/_astro/parceiro-cisco-recortado-mv13cxaz_Z1TpJ2A.webp) ### [CISCO](/en/integrations/cisco/) Concentrators ยท OLT * ![Logo Cambium Networks](/_astro/parceiro-cambium-networks-recortado-mv13cy73_1mGc3G.webp) ### [Cambium Networks](/en/integrations/cambium-networks/) OLT * ![Logo Chima](/_astro/parceiro-chima-recortado-mv13cyrc_Z1w6UFv.webp) ### [Chima](/en/integrations/chima/) OLT * ![Logo Cianet](/_astro/parceiro-cianet-recortado-mv13cyws_1tS2cW.webp) ### [Cianet](/en/integrations/cianet/) OLT ![Illuminated fiber optic cables converging into a connection hub](/_astro/site-cta04_TkBg7.webp) ## Want to use this integration with your internet service provider (ISP)? [ Request a Demo ](/en/request-a-demo/)