# Hubsoft integration with ZTE (olt) > ZTE manufactures telecom equipment for operators in several countries. With Hubsoft, C300, C320, C610. Fonte: https://hubsoft.io/en/integrations/zte/ ![Logo ZTE](/_astro/parceiro-zte-recortado-mv13dsyh_ZST3zE.webp) [OLT](/en/integrations/category/olt/) # Hubsoft integration with ZTE Hubsoft, an ERP for internet service providers (ISPs), integrates with ZTE to authorize, provision, and unauthorize ONUs on the brand's OLTs. Technicians release the subscriber's ONU from the Hubsoft screen without needing OLT credentials. ZTE manufactures telecom equipment for operators in several countries. With Hubsoft, C300, C320, C610, and C220 OLTs receive ONU authorization and provisioning via SSH. [ Request a Demo ](/en/request-a-demo/) [Partner website](https://www.zte.com.cn/global/) ## About ZTE ZTE manufactures telecommunications equipment and solutions. It serves operators, governments, businesses, and consumers in more than 160 countries and regions. ## What the integration does The integration connects Hubsoft to the ZTE OLT via SSH. After registering the OLT, the team can use Hubsoft to: * Check connected ONUs and those pending authorization on each PON port. * Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs immediately afterward, with no further action. * Unauthorize and deprovision using the commands from the same profile. * Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number. * Wi-Fi network name and password, including the 5 GHz network, provided during authorization when the CPE profile has Wi-Fi commands. * Custom commands after provisioning, such as adjusting Wi-Fi or enabling VoIP. * Alert when the ONU signal exceeds the limit on ports with verification enabled. * Record sent commands to check the OLT response when something fails. **Integrated models:** * C300 (SSH, port 22) * C320 (SSH, port 22) * C610 (SSH, port 22) * C610 02 (SSH, port 22) * ZXA10 C220 (SSH, port 22) ## What you need * A ZTE OLT of one of the models above, with an access IP address. * Username, password, and access port for Hubsoft to access the OLT. * The OLT's POP registered under Network > Points of Presence. * CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Configuration > Network > CPE Profiles. The Hubsoft team has reference profiles for ZTE (bridge and router, for C300/C320 and C610). ## How to activate 1. Under Network > Connection Equipment, click Add and enter the name, IP address, ZTE as the manufacturer, model, and POP. 2. Enter the username, password, and access port: SSH, port 22. 3. Under Actions > View, enable editing and register the PON ports in the Interfaces tab, individually or in bulk, with chassis, slot, PON, starting VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers. 4. To test, open Actions > View Connected Customers and check the Layer 2 and Pending Layer 2 tabs. 5. Authorize the first ONU from the menu next to it by entering the customer, service, and CPE profile. The step-by-step guide with screenshots is available in the Hubsoft wiki: [OLT and port registration](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/cadastrar-olt-portas), [ONU authorization and provisioning](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/autorizacao-provisionamento-onu) and [integrated OLT list](https://wiki.hubsoft.com.br/pt-br/modulos/rede/equipamento%5Fconexao/olt%5Fintegradas). ## Limitations * Bulk authorization and provisioning work with one PON at a time. If the PON has ONUs in bridge and router mode, process one type at a time. * When registering ports in bulk, register no more than 4 slots at a time. * When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the customer's link to the ONU. ## Frequently asked questions ### My ZTE model isn't on the list. What now? Contact the Hubsoft Infra Support team. They will assess whether the model can be integrated. ### Does the technician need the OLT password? No. The username and password are stored in the equipment record. Operators can check and authorize ONUs from the Hubsoft screen without the OLT credentials. ### Can I authorize multiple ONUs at once? Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to customer services, with the serial number entered in the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN. Reviewed on 10/10/2026. ## Similar integrations * ![Logo BDCOM](/_astro/parceiro-bdcom-recortado-mv13crbv_Z7coXR.webp) ### [BDCOM](/en/integrations/bdcom/) OLT * ![Logo CDATA](/_astro/parceiro-cdata-recortado-mv13cwj6_Z21Dgze.webp) ### [CDATA](/en/integrations/cdata/) OLT * ![Logo CISCO](/_astro/parceiro-cisco-recortado-mv13cxaz_Z1TpJ2A.webp) ### [CISCO](/en/integrations/cisco/) Concentrators ยท OLT * ![Logo Cambium Networks](/_astro/parceiro-cambium-networks-recortado-mv13cy73_1mGc3G.webp) ### [Cambium Networks](/en/integrations/cambium-networks/) OLT * ![Logo Chima](/_astro/parceiro-chima-recortado-mv13cyrc_Z1w6UFv.webp) ### [Chima](/en/integrations/chima/) OLT ![Illuminated fiber optic cables converging into a connection hub](/_astro/site-cta04_TkBg7.webp) ## Want to use this integration with your internet service provider (ISP)? [ Request a Demo ](/en/request-a-demo/)