Hubsoft integration with Digistar

About Digistar

Digistar Telecomunicações has operated in information and communication technology since 1999. Its GPON/EPON line includes OLTs, ONUs, and management software, and the company also manufactures PABX systems, gateways, softswitches, and routers.

What the integration does

The integration connects Hubsoft to the Digistar OLT through Telnet. Once the OLT is registered, the team can use Hubsoft to:

• Check the ONUs connected to and pending authorization on each PON port.
• Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs immediately afterward, with no further action required.
• Unauthorize and deprovision using the commands from the same profile.
• Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number.
• Enter the Wi-Fi name and password, including for the 5 GHz network, during authorization when the CPE profile includes Wi-Fi commands.
• Run custom commands after provisioning, such as adjusting Wi-Fi settings or activating VoIP.
• Receive an alert when the ONU signal exceeds the limit on ports with monitoring enabled.
• Record the commands sent so you can check the OLT response when something fails.

Integrated models:

• DOLT1404 (Telnet, port 23)
• DOLT1408 (Telnet, port 23)
• DOLT1416 (Telnet, port 23)

What you need

• A Digistar OLT in one of the models above, with an access IP address.
• The username, password, and access port for Hubsoft to connect to the OLT.
• The OLT's POP registered under Network > Points of Presence.
• CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Settings > Network > CPE Profiles. The Hubsoft team provides reference profiles for Digistar (bridge, router with ONUs from other brands, and router with Wi-Fi (DOLT1408)).

How to activate

1. Under Network > Connection Equipment, click Add and enter the name, IP address, Digistar as the manufacturer, model, and POP.
2. Enter the username, password, and access port: Telnet, port 23.
3. Under Actions > View, enable editing and register the PON ports in the Interfaces tab, individually or in bulk, with chassis, slot, PON, initial VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers.
4. To test, open Actions > View Connected Clients and check the Layer 2 and Pending Layer 2 tabs.
5. Authorize the first ONU using the menu next to it, entering the customer, service, and CPE profile.

The step-by-step guide with screenshots is available in the Hubsoft wiki: OLT and port registration, ONU authorization and provisioning and list of integrated OLTs.

Limitations

• Bulk authorization and provisioning work with one PON at a time. If the PON has ONUs in bridge and router modes, process one type at a time.
• When registering ports in bulk, register a maximum of 4 slots at a time.
• When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the link between the customer and the ONU.

Frequently asked questions

My Digistar model isn't on the list. What now?

Contact the Hubsoft Infrastructure Support team. They will assess whether the model can be integrated.

Does the technician need the OLT password?

No. The username and password are stored in the equipment record. Operators can view and authorize ONUs from the Hubsoft screen without the OLT credentials.

Can I authorize multiple ONUs at once?

Yes, one PON at a time, under Actions > View Connected Clients. The ONUs must be linked to customer services, with the serial number entered in the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN.

Reviewed on 10/10/2026.