Hubsoft integration with Parks

About Parks

Parks was founded in 1966 and develops and manufactures telecommunications equipment in Brazil. The group has two business units: Parks Solutions, focused on networks and connectivity, and Parks MyEMS, focused on electronic manufacturing.

What the integration does

The integration connects Hubsoft to the Parks OLT via SSH. Once the OLT is registered, the team can use Hubsoft to:

• Check connected ONUs and those pending authorization on each PON port.
• Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs right afterward, with no additional action.
• Unauthorize and deprovision using the commands from the same profile.
• Bulk authorization and provisioning, one PON at a time, for ONUs already linked to services by serial number.
• Wi-Fi network name and password, including the 5 GHz network, entered during authorization when the CPE profile includes Wi-Fi commands.
• Custom commands after provisioning, such as adjusting Wi-Fi or activating VoIP.
• Alerts when the ONU signal exceeds the limit on ports with monitoring enabled.
• Log of sent commands to check the OLT response when something fails.

Integrated models:

• Fiberlink 10008 (SSH, port 22)
• Fiberlink 10008S (SSH, port 22)
• Fiberlink 10008S (Series 2) (SSH, port 22)
• Fiberlink 20048 (SSH, port 22)
• Fiberlink 30028 (SSH, port 22)
• Fiberlink 40016 (SSH, port 22)

What you need

• A Parks OLT in one of the models above, with an access IP address.
• OLT access username, password, and port for Hubsoft.
• The OLT POP registered under Network > Points of Presence.
• CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Configuration > Network > CPE Profiles. The Hubsoft team provides reference profiles for Parks (bridge, router, and router with Wi-Fi).

How to activate

1. Under Network > Connection Equipment, click Add and enter the name, IP address, Parks as the manufacturer, model, and POP.
2. Enter the access username, password, and port: SSH, port 22.
3. Under Actions > View, enable editing and register the PON ports in the Interfaces tab, individually or in bulk, with chassis, slot, PON, starting VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers.
4. To test, open Actions > View Connected Customers and check the Layer 2 and Pending Layer 2 tabs.
5. Authorize the first ONU using the menu beside it, entering the customer, service, and CPE profile.

The step-by-step guide with screenshots is available in the Hubsoft wiki: OLT and port registration, ONU authorization and provisioning and integrated OLT list.

Limitations

• Bulk authorization and provisioning handle one PON at a time. If a PON has ONUs in bridge and router mode, process one type at a time.
• When registering ports in bulk, register no more than 4 slots at a time.
• When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the customer-to-ONU link.

Frequently asked questions

My Parks model isn’t on the list. What now?

Contact the Hubsoft Infrastructure Support team. They will assess whether the model can be integrated.

Does the technician need the OLT password?

No. The username and password are stored in the equipment record. Operators can view and authorize ONUs from the Hubsoft screen without the OLT credentials.

Can I authorize multiple ONUs at once?

Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to customer services, with the serial number entered in the service’s Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN.

Reviewed on 10/10/2026.