Hubsoft integration with Tenda

Hubsoft, the ERP for internet service providers (ISPs), integrates with Tenda to authorize, provision, and unauthorize ONUs on the brand's OLTs. Technicians release the subscriber's ONU from the Hubsoft screen without needing the OLT credentials.

Tenda manufactures routers, switches, and broadband access equipment. With Hubsoft, the TES7008 OLT receives SSH commands to authorize and provision ONUs in router mode.

Request a Demo Partner website

About Tenda

Tenda manufactures network communication equipment. Its products cover Ethernet, Wi-Fi, broadband access, and power line communication for homes and businesses.

What the integration does

The integration connects Hubsoft to the Tenda OLT via SSH. Once the OLT is registered, the team can use Hubsoft to:

View connected and pending-authorization ONUs on each PON port.
Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs right afterward, with no additional action.
Unauthorize and deprovision using the commands from the same profile.
Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number.
Enter the Wi-Fi name and password, including for the 5 GHz network, during authorization when the CPE profile has Wi-Fi commands.
Run custom commands after provisioning, such as adjusting Wi-Fi or activating VoIP.
Receive an alert when the ONU signal exceeds the limit on ports with monitoring enabled.
Log sent commands to check the OLT response when something fails.

Integrated model:

TES7008 (SSH, port 22)

What you need

A Tenda OLT of the model above, with an access IP address.
The username, password, and access port for the OLT to be used by Hubsoft.
The OLT's POP registered under Network > Points of Presence.
CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Settings > Network > CPE Profiles. The Hubsoft team provides reference profiles for Tenda (router).

How to activate

Under Network > Connection Equipment, click Add and enter the name, IP address, Tenda as the manufacturer, the model, and the POP.
Enter the username, password, and access port: SSH, port 22.
Under Actions > View, enable editing and register the PON ports on the Interfaces tab, individually or in bulk, with the chassis, slot, PON, initial VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers.
To test, open Actions > View Connected Customers and check the Layer 2 and Pending Layer 2 tabs.
Authorize the first ONU using the menu next to it, entering the customer, service, and CPE profile.

The step-by-step guide with screenshots is available in the Hubsoft wiki: OLT and port registration, ONU authorization and provisioning and integrated OLT list.

Limitations

Bulk authorization and provisioning process one PON at a time. If the PON has ONUs in bridge and router modes, process one type at a time.
When registering ports in bulk, register no more than 4 slots at a time.
When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the customer's link to the ONU.

Frequently asked questions

My Tenda model isn't on the list. What now?

Contact the Hubsoft Infra Support team. They will assess whether the model can be integrated.

Does the technician need the OLT password?

No. The username and password are stored in the equipment record. Operators can view and authorize ONUs from the Hubsoft screen without the OLT credentials.

Can I authorize multiple ONUs at once?

Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to the customers' services, with the serial number entered on the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN.

Reviewed on 10/10/2026.