Hubsoft integration with TP-Link

Hubsoft, an ERP for internet service providers (ISPs), integrates with TP-Link to authorize, provision, and deauthorize ONUs on the brand's OLTs. Technicians release the subscriber's ONU from the Hubsoft screen, without needing OLT credentials.

TP-Link manufactures routers, switches, and network equipment. With Hubsoft, the P1201 and DS-P7001-01 OLTs receive subscriber ONU authorization and provisioning via Telnet.

Request a Demo Partner website

About TP-Link

TP-Link manufactures Wi-Fi network equipment for homes and businesses and was founded in 1996. The brand also offers OLTs for fiber providers.

What the integration does

The integration connects Hubsoft to the TP-Link OLT via Telnet. Once the OLT is registered, the team can use Hubsoft to:

Check connected ONUs and those pending authorization on each PON port.
Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs immediately afterward, with no further action.
Deauthorize and deprovision using the commands from the same profile.
Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number.
Wi-Fi network name and password, including the 5 GHz network, provided during authorization when the CPE profile has Wi-Fi commands.
Custom commands after provisioning, such as adjusting Wi-Fi or activating VoIP.
Alerts when the ONU signal exceeds the limit on ports with monitoring enabled.
Log sent commands to check the OLT response when something fails.

Integrated models:

P1201 (Telnet, port 23)
DS-P7001-01 (Telnet, port 23)

What you need

A TP-Link OLT in one of the models above, with an access IP address.
The username, password, and OLT access port for Hubsoft.
The OLT's POP registered under Network > Points of Presence.
CPE profiles with authorization, provisioning, deprovisioning, and deauthorization commands under Configuration > Network > CPE Profiles.

How to activate

Under Network > Connection Equipment, click Add and enter the name, IP address, TP-Link as the manufacturer, model, and POP.
Enter the username, password, and access port: Telnet, port 23.
Under Actions > View, enable editing and register the PON ports on the Interfaces tab, individually or in bulk, with chassis, slot, PON, starting VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers.
To test, open Actions > View Connected Customers and check the Layer 2 and Pending Layer 2 tabs.
Authorize the first ONU using the menu next to it by entering the customer, service, and CPE profile.

The step-by-step guide with screenshots is available in the Hubsoft wiki: OLT and port registration, ONU authorization and provisioning and integrated OLT list.

Limitations

Bulk authorization and provisioning process one PON at a time. If the PON has ONUs in bridge and router modes, process one type at a time.
When registering ports in bulk, register a maximum of 4 slots at a time.
When changing PONs, deauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, deauthorization also removes the link between the customer and the ONU.

Frequently asked questions

My TP-Link model isn't on the list. What now?

Contact the Hubsoft Infra Support team. They will assess whether the model can be integrated.

Does the technician need the OLT password?

No. The username and password are stored in the equipment record. The operator checks and authorizes ONUs from the Hubsoft screen, without OLT credentials.

Can I authorize multiple ONUs at once?

Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to customer services, with the serial number entered on the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN.

Reviewed on 10/10/2026.