Hubsoft integration with V-Solution

About V-Solution

V-Solution, the VSOL brand, develops, manufactures, and sells fiber-optic access products, such as OLTs and XPON ONUs, and 4G and 5G wireless CPEs. The company focuses on FTTx solutions.

What the integration does

The integration connects Hubsoft to the V-Solution OLT via Telnet or SSH, depending on the model. Once the OLT is registered, the team can use Hubsoft to:

• View connected ONUs and those pending authorization on each PON port.
• Authorize the ONU linked to the customer and service, using the selected CPE profile. Provisioning runs immediately afterward, with no additional action.
• Unauthorize and deprovision using the commands from the same profile.
• Authorize and provision in bulk, one PON at a time, for ONUs already linked to services by serial number.
• Enter the Wi-Fi network name and password, including for the 5 GHz network, during authorization when the CPE profile includes Wi-Fi commands.
• Run custom commands after provisioning, such as adjusting Wi-Fi settings or activating VoIP.
• Receive an alert when the ONU signal exceeds the limit on ports with monitoring enabled.
• Log the commands sent so you can check the OLT response when something fails.

Integrated models:

• V1600D (Telnet, port 23)
• V1600G1 (Telnet, port 23)
• V1600G1B (Telnet, port 23)
• V1600G2 (Telnet, port 23)
• V1600GS(F) (SSH, port 22)

What you need

• A V-Solution OLT in one of the models above, with an access IP address.
• The username, password, and access port for the Hubsoft connection to the OLT.
• The OLT's POP registered under Network > Points of Presence.
• CPE profiles with authorization, provisioning, deprovisioning, and unauthorization commands under Settings > Network > CPE Profiles. The Hubsoft team provides reference profiles for V-Solution (bridge (V1600D and V1600G1) and router (V1600G1B)).

How to activate

1. Under Network > Connection Devices, click Add and enter the name, IP address, V-Solution manufacturer, model, and POP.
2. Enter the username, password, and access port: Telnet, port 23, for the V1600D, V1600G1, V1600G1B, and V1600G2; SSH, port 22, for the V1600GS(F).
3. Under Actions > View, enable editing and register the PON ports on the Interfaces tab, individually or in bulk, with the chassis, slot, PON, starting VLAN, VLAN increment, default CPE profile, and the concentrator that authenticates customers.
4. To test, open Actions > View Connected Customers and check the Layer 2 and Pending Layer 2 tabs.
5. Authorize the first ONU from the menu next to it by entering the customer, service, and CPE profile.

The step-by-step guide with screenshots is available in the Hubsoft wiki: OLT and port registration, ONU authorization and provisioning and integrated OLT list.

Limitations

• Bulk authorization and provisioning process one PON at a time. If the PON has ONUs in bridge and router modes, process one type at a time.
• When registering ports in bulk, register a maximum of 4 slots at a time.
• When changing PONs, unauthorize the ONUs from the old PON directly on the OLT. In Hubsoft, unauthorization also removes the customer's link to the ONU.

Frequently asked questions

My V-Solution model isn't on the list. What now?

Contact the Hubsoft Infra Support team. They will assess whether the model can be integrated.

Does the technician need the OLT password?

No. The username and password are stored in the equipment record. Operators can view and authorize ONUs from the Hubsoft screen without the OLT credentials.

Can I authorize multiple ONUs at once?

Yes, one PON at a time, under Actions > View Connected Customers. The ONUs must be linked to customer services, with the serial number entered on the service's Authentication tab. After bulk authorization, bulk provisioning applies the CPE profile and VLAN.

Reviewed on 10/10/2026.